Semi-automatic syringe filling system for Lendrotide The filling system is equipped with a storage container for heating the dronabinol to 60–70°C and keeping the temperature constant during the filling process. The syringe is filled through the syringe tip and under a protective gas atmosphere (e.g., argon). No air should remain in the syringe. The filling system is suitable for the filling amounts of 265 mg, 530 mg, or 1060 mg with tight tolerance limits. The dosing accuracy of the Pharma Dispenser 3VHD8 (0.35 ml/U) amounts to 1%. The repeat accuracy is > 99% depending on the material. Detailed material data are currently not available. The determination of the actual dosing accuracy and dose time takes place during commissioning. The customer is taking care of the process development. The storage container has a capacity of 500 ml and withstands a pressure of 0 to +6 bar (gauge) General information.
The filling system is designed as a tabletop device for pharma control.
- 16A – Hygienic design
- Operating modes : parameterisation and calibration function & digital monitoring predefined status and error messages
- Stainless steel housing (AISI 304) including touch panel
- IP65 88-264 VAC
- 1 Ph & 16A & 47-63Hz reportable lt
- Art. 22 Abs 10 EG-Dual-Use VO Suitable for GMP Processes
- Suitable for filling 265 mg, 530 mg or 1060 mg
- Dronabinol in glass syringes through their Syringe opening (Luer Cap)
- The dosing accuracy of the Hygienic Dispenser 3VHD8 (0,35ml/U) amounts 1%.
- The determination of the actual dosing accuracy and dosing time takes place during commissioning.
- Product contacted surface < = 0,8μm
- Elastomers with FDA declaration of conformity
- Parts in contact with the product can be autoclaved (max. 15 min @ + 121 ° C)
- Hygienic design: easy to dismantle and clean
- Hermetically sealed process space
The filling of the syringes is carried out with a protective gas bell (protective argon atmosphere) Alternatively e.g. a complete enclosure under a protective atmosphere is conceivable. The syringe is equipped with a Luer cap. If the connection is not stable a bracket for fixation can be retrofitted.
- Volume 0,5 litre
- Pressure range: 0 to +6 bar g
- Material 1.4404 / 316L
- Surface: sanded Ra<0,8μm
- ND 50 mm
- Length approx. 600mm
- Covered with a double jacket divided into two heating zones including a guide spiral for on-site hot water via temperature control unit
- Connections Lid with push-in fitting for pressurisation using a 6mm hose
- TC DN15 connections for inflow and outflow of the heating zones
- TC DN15 connection for outlet
- Heatable up to 60-70°C
- Homogeneous temperature distribution inside the storage tank
- Product pipe (bend from the storage container to the dispenser) DN 15 / B90 double-walled for heating Parts in contact with the product are made of stainless steel (316L) or FDA-compliant plastics
- Dispenser: 1.4404
- Storage tank 1.4404
- Handling and operation are easy